NFS

↓Visitors on blog including you↓

Printer Friendly Zonda Guide

How To Create CPMAN’s Super Zonda for Drag in NFS

Note: Click means to press a button on your D-Pad a certain amount of times.

Getting Started:

1. Buy a Pagani Zonda F

2. Buy all Stage 4 parts using the “unlockallthings” code

3. Buy the Widebody body kit

4. Buy a spoiler of your choice

5. Buy a roll cage

Tuning:

Suspension:

1. Shock Compression-         Stiff

2. Shock Rebound-                Stiff

3. Spring Rate-                       Stiff

4. Roll Bar Stiffness-              Stiff

5. Ride Height-                       High

6. Front Tire Pressure-           High

7. Rear Tire Pressure-            Low

8. Toe-                                    Positive

9. Caster-                                Negative

10. Camber-                            Positive

11. Steering Response Ratio- Stiff

Engine:

1. Cam Timing-                       Retard

2. Start Boost-                         High

3. End Boost-                          High

4. Nitrous Pressure-                Low

5. Nitrous Jetting Flow Rate-   High

Drivetrain:

1. 1st to 6th Gear-                   should be 3 clicks right from short

2. Final Drive Gear-                 Tall

Racing:

How to Drag the Zonda on 1/4 mile Drag Strip

1. Get Max Grip if possible

3. Shift into 1st right after the yellow light, or when it says Go

4. Right when you shift into 2nd press the nitrous button

5. Finish!

6. You should finish around 7.00 – 6.20

How to Drag the Zonda on 1/2 mile Drag Strip

1. Get Max Grip if possible

3. Shift into 1st and press nitrous at Go or right after yellow light

4. When nitrous refills, press the nitrous button again

5. Finish!

6. You should finish around 1100 – 10.00

Printer Friendly Supra Guide

How to create CPMAN’s Supra for drag in NFS: Pro Street
Note: Click means to press a button on your D-Pad a certain amount of times.

Getting Started:
1. Buy a Toyota Supra
2. Buy all Stage 4 parts using the “unlockallthings” code
3. Buy the Widebody body kit
4. Buy a spoiler of your choice
5. Buy a roll cage

Tuning:
Suspension:
1. Shock Compression-          should be 1 click left from the middle
2. Shock Rebound-                 should be 1 click left from the middle
3. Spring Rate-                       should be 1 click left from the middle
4. Roll Bar Stiffness-             should be 1 click left from the middle

5. Ride Height-                      Your choice, but has to be at least 1 click left from the middle

6. Front Tire Pressure-         High
7. Rear Tire Pressure-           Low

8. Toe-                                    Default Setting
9. Caster-                              Default Setting
10. Camber-                        should be 1 click right from the middle

11. Steering Response Ratio- Stiff

Engine:
1. Cam Timing-                  Retard
2. Start Boost-                     High
3. End Boost-                       High

4. Nitrous Pressure-                    Low
5. Nitrous Jetting Flow Rate-  High

Drivetrain:
1. 1st to 6th Gear-                should be 3 clicks right from short
2. Final Drive Gear-            Tall

Racing:
How to Drag the Supra on 1/4 mile Drag Strip
1. Get Max Grip if possible
2. Rev
3. Shift into 1st right after the yellow light, or when it says Go
4. When you shift into 3rd press the nitrous button
5. Finish!
6. You should finish around 7.99 – 6.87

How to Drag the Supra on 1/2 mile Drag Strip
1. Get Max Grip if possible
2. Rev
3. Shift into 1st and press nitrous at Go or right after yellow light
4. When nitrous refills, press the nitrous button again
5. Finish!
6. You should finish around 12.00 – 10.99

-cpman